Products / Professional Vests / Safety vestsISO 20471 Class 2 / Modell 206 optional color on the shoulder section

Modell 206 optional color on the shoulder section

Modell 206 optional color on the shoulder section

Provides great flexibility and possibilities for corporate identity purposes! A very cost efficient way to create unique vests fully adapted for your needs. Design based on our flexible standard model 206 which is approved according to EN ISO 20471 Class 2.

Zipper in front. Loop for hanging.

Possibilities to choose your own bias colour. Print logo on the front and/or back. Choose between reflective transfer or regular colour transfer. Read more about the printing options for this vest below.

Choose from three different fluorescent colours. Blue yellow, green/orange and white/red are standard combinations. Possibilities to choose your own bias colour.

 Standard combinations

Choose from 22 different fabric colours to use on shoulder section.

See pdf here for approximate indication of the closest color. To be completely safe – order a physical sample!

Made to order – contact us for prices and minimum order quantity.

Quick facts


EN ISO 20471 Class 2


50 x 60 °C


100 % Polyester 130/110 g/m²


Yellow, orange, red. Shoulder section: choose from 22 colors.



Size Guide



Wash & Care Instructions

Size Guide

Please use the table below to find the suitable size. B is half the circumference.


A (cm) B (cm)
XS 83 54
S 77 60
M 74 66
L 74 72
XL 74 78
XXL 74 84


Our garments are well suited to be printed on. The print can be a logo or a text in one or more colours. With prints in reflective materials, the logos/Corporate identity will be provided 24 hours a day. Please also not the effect of reflective logos in colours.

Wash & Care Instructions

Dirty protective clothing may reduce protection and affect wearers’ safety. To maintain the garment’s protective properties, correct and regular wash- and care is required.  Dirty protective clothing shall not be stored, but washed immediately. The wash and care instructions is showing in the neck label on the garment.

Recommended number of washing cycles and washing temperature the garment has been tested and approved for: 50 x 60 °C

These instructions partially indicates the garment quality/durability. Follow this carefully or garment visibility may suffer.

Tumble drying: This garment cannot be tumble dried.
General instructions for washing- and drying of protective clothing
  • The garments must be washed separately and with all closures fastened.
  • Use only synthetic detergents to maintain the garment’s protective properties.
  • Do not use detergents containing bleaching agents, this reduces the protective properties.
  • Do not use fabric softener.
  • Wash separately or with garments approved to EN 471 in similar colours.
  • Garments with retro-reflective stripes must be washed inside out.
  • Rinse properly after wash.
  • Tunnel wash or –drying is not recommended.
  • Avoid direct and intensive steam while ironing.
Lifetime and storage

The stated maximum number of cleaning cycles is not the only factor related to the lifetime of the garment. The lifetime will also depend on usage, care storage, etc. Store garments in clean, dry and dark conditions with air circulation when not in use. Warm, humid storage can cause hydrolysis, a chemical reaction that can weaken or remove the protective properties in the garment.