Model 318 FR+AS

Model 318 FR+AS

Flame retardant and antistatic properties. Limited flame spread and protection against convective and radiant heat. Reflective material in heat transfer makes the sweater comfortable.

Our model 318 FR+AS is made with inherently self extinguishing Protex modacrylic fibers. There is no deterioration in flame retardency after either repeated washing or normal use over time.

Quick facts


EN ISO 20471 Class 3
EN ISO 11612:2008 A1, B1, C1
EN 1149-5


25 x 60 °C


220 g/m²





Size Guide



Wash & Care Instructions

Size Guide

Please note! The sizes has changed (January 2015). If you previously had size M, then you should now choose a size S (i.e. one size smaller than before).

Please use the table below to find the suitable size. B is half the circumference.


A (cm) B (cm)
S 69 53
M 71 58
L 73 63
XL 75 68
XXL 77 73
3XL 80 78


Our garments are well suited to be printed on. The print can be a logo or a text in one or more colours. With prints in reflective materials, the logos/Corporate identity will be provided 24 hours a day. Please also not the effect of reflective logos in colours.

Wash & Care Instructions

Dirty protective clothing may reduce protection and affect wearers’ safety. To maintain the garment’s protective properties, correct and regular wash- and care is required.  Dirty protective clothing shall not be stored, but washed immediately. The wash and care instructions is showing in the neck label on the garment.

Recommended number of washing cycles and washing temperature the garment has been tested and approved for: 25 x 60 °C

These instructions partially indicates the garment quality/durability. Follow this carefully or garment visibility may suffer.

Tumble drying: This garment cannot be tumble dried
General instructions for washing- and drying of protective clothing:
  • The garments must be washed separately and with all closures fastened.
  • Use only synthetic detergents to maintain the garment’s protective properties.
  • Do not use detergents containing bleaching agents, this reduces the protective properties.
  • Do not use fabric softener.
  • Wash separately or with garments approved to EN 471 in similar colours.
  • Garments with retro-reflective stripes must be washed inside out.
  • Rinse properly after wash.
  • Tunnel wash or –drying is not recommended.
  • Avoid direct and intensive steam while ironing.
Lifetime and storage

The stated maximum number of cleaning cycles is not the only factor related to the lifetime of the garment. The lifetime will also depend on usage, care storage, etc. Store garments in clean, dry and dark conditions with air circulation when not in use. Warm, humid storage can cause hydrolysis, a chemical reaction that can weaken or remove the protective properties in the garment.